How To Tether Or Use Your Globe Telecom BlackBerry As An External Modem

Your Blackberry phone device (with tethered modem capability) can be used as an external modem to connect a computer or laptop computer to the Internet.

Summary of Tasks

To set up a tethered modem, complete the following tasks:

1. Install Blackberry Desktop Software 4.1 or later (one time only).
2. Set up the Internet Access Point Name (APN) (one time only).
3. Configure dial-up networking (one time only).
4. Connect the Blackberry device to Blackberry Desktop Manager.
5. Connect to the Internet using dial-up networking.

Task 1

Install Blackberry Desktop Software 4.1 or later on the computer.
When you install Blackberry Desktop Software, the drivers that enable the Blackberry device to communicate through the USB port and virtual COM port are installed. The Standard Modem, which is used by dial-up networking, is also installed.

Note: If you are upgrading your Blackberry Desktop Software from version 4.0 to 4.1, the required Virtual COM Port and Standard Modem might be removed during the upgrade process. If this is the case, re-install the Blackberry Desktop Software 4.1 or later and choose the Repair option to re-install these components.

Task 2

Set up Internet APN

1. Go to Start > Settings > Control Panel.
2. Double-click Phone and Modem Options.
3. In the Phone and Modem Options window, click the Modems tab.
4. Select Standard Modem and click Properties.
5. Click on Change Settings
6. In the Standard Modem Properties window, click the Advanced tab.
7. In the Extra initialization commands field, type the following:
+cgdcont=1,”IP”,”internet.globe.com.ph”

Note: If you do not know your Internet APN, or if you do not have an Internet APN, contact your service provider.

8. Click OK.
9. In the Phone and Modem Options window, click OK.

Task 3

To configure dial-up networking, complete the procedure that corresponds with the operating system you are using.

Windows Vista

1. Click Start.
2. Select Connect To.
3. Click Setup a connection or network.
4. Click Setup a dialup connection.
5. In the Dial-up phone number field type *99#.
6. Type the user name and password provided by your service provider.
7. In the Connection Name field type Blackberry.
8. Click Dialing Rules.
9. Make sure the profile created in Task 2 has been selected, and then click OK.
10. Select Connect to establish an internet.

Windows XP Operating System

1. Go to Start > Settings > Network Connections.
2. Double-click New Connection Wizard. The New Connection Wizard opens.
3. Click Next.
4. Select the Connect to the Internet option. Click Next.
5. Select Set up my connection manually. Click Next.
6. Select Connect using a dial-up modem. Click Next.
7. If the Select a Device screen appears, select the Modem – Standard Modem check box. Click Next.
8. In the ISP Name field, type a name for your connection. Click Next.
9. In the Phone number field, type *99#. Click Next.
10. Indicate which users will have access to the connection. Click Next.
11. Type the user name and password provided by your service provider. Click Next.
12. Click Finish.
13. In the Connect window, click Properties.
14. In the Properties window, verify that Modem – Standard Modem appears beneath the Connect using heading, then click Configure.
15. In the Modem Configuration window, clear the Enable hardware flow control check box and make sure none of the other check boxes are selected. Click OK. In the Properties window, click OK.

Windows 2000 Operating System

1. Go to Start > Settings > Control Panel.
2. Double-click Network and Dial-up Connections.
3. Double-click Make New Connection. The Network Connection Wizard opens.
4. Click Next.
5. Choose Dial-up to private network. Click Next.
6. In the Phone number field, type *99#. Click Next.
7. Indicate which users will have access to the connection. Click Next.
8. Type a name for your connection. Click Finish.
9. In the Connect window, click Properties.
10. In the Properties window, verify that Modem – Standard Modem is selected, then click Configure.
11. In the Modem Configuration window, clear the Enable hardware flow control check box and make sure none of the other check boxes are selected. Click OK.
12. In the Properties window, click OK.

Task 4

Connect the Blackberry device to the computer and verify that Blackberry Desktop Manager displays Connected. The Blackberry device must be identified by Blackberry Desktop Manager in order for the modem to establish a connection.

Important: Blackberry Desktop Manager must be running for the tethered modem to function.

Note: If Microsoft Outlook® is not operating in cache mode, you might receive a message indicating that Blackberry Desktop Manager cannot contact the messaging server. If this message appears, click Cancel to proceed.

Task 5

Connect to the Internet using dial-up networking

Note: During this procedure, do not operate the BlackBerry Browser or any third-party applications on the BlackBerry device. An active data session may interfere with the modem connection. Also, make sure an ethernet connection is not active at the same time.

1. Connect the BlackBerry device to the computer.
2. Open BlackBerry Desktop Manager.
3. Click Start > Settings > Network Connections > .
4. Type the user name and password provided by your service provider.
5. Click Dial.

9 thoughts on “How To Tether Or Use Your Globe Telecom BlackBerry As An External Modem”

  1. Go to system prefs then network. Click RIM device, then click advanced. Choose vendor: REsearch in Motion, Model: blackberry GSM, APN: internet.globe.com.ph. Then click ok. Leave telephone number, account name, password blank. Then connect. Scared to use this coz it might bloat my bill.

  2. thanks for the info, will try the mac procedure later. how do i get billed for this? is this a dial up connection? is it going to be billed per minute? how much are the charges?





Leave a Reply

Your email address will not be published. Required fields are marked *